Creating a standard for wearing wildland PPE during grass fire season
Grass fires can change from a manageable patch into a fast-moving front within minutes, exposing crews to flame, radiant heat, embers, smoke and flying debris. A clear PPE standard helps volunteer brigades across Australia make sensible choices when an incident is noisy, visibility is poor and every crew member is stretched.
The standard should pair minimum clothing requirements with task-specific protection, then make selection, fit, inspection and training easy to verify. For small rural brigades, it must also be affordable, workable with volunteer staffing and adaptable to state fire danger periods rather than sitting unused on a shelf.
A shared safety baseline
Many departments already have jackets, trousers, gloves and boots, but the items may come from different eras, suppliers or donations. Mixing a cotton shirt with a non-flame-resistant jacket can create a false sense of protection. A shared baseline closes that gap by defining the clothing required whenever personnel enter the fire environment.
The baseline should cover the whole ensemble, not just a helmet or jacket. It should also establish who checks it, who replaces damaged items and how a member reports that clothing no longer fits. This turns equipment from a personal possession into managed operational protection supported by the department.
Equipment levels for different fire conditions
Use clear equipment levels tied to conditions. For low-to-moderate grass fire work, the baseline can include flame-resistant shirts and trousers, sturdy boots, gloves, eye protection and a protective helmet suited to the task. For exposed flanks, crown fire or hotter weather, added layers and specialist fire PPE should be specified rather than improvised.
Each item needs a traceable standard, size and condition. The policy should point to current Australian Standards, including AS/NZS 1863 for wildland firefighting personal protective equipment, plus applicable requirements for helmets, eyes, hands and feet. Labels, purchase records and manufacturer instructions should stay with department-managed stock.
Structural or vehicle fires call for a separate risk assessment and, where indicated, respiratory protection; grass-fire clothing must not be presented as structural turnout gear. Clothing worn close to a vehicle, electrical hazard or confined space needs an incident-specific decision from qualified command and safety personnel.
Choosing PPE for Australian conditions
Conditions differ sharply across Australia. Melbourne’s interface crews face ember attack alongside suburban traffic; Canberra crews work dry grassland near the capital; Hobart crews operate in steep, wind-exposed bushland; and rural NSW brigades may work near crops or harvest operations. Fire danger periods, total fire bans and the routines of CFA and NSW RFS volunteers shape local readiness.
Australian buyers also navigate a fragmented market. Specialist PPE distributors sit alongside mainstream workwear outlets, while regional freight and lead times can delay an entire crew when one hood, glove or trouser size is unavailable. State associations, local councils and pooled purchasing can negotiate better terms. Second-hand clothing may help, but unknown history, contamination or altered fit should rule it out.
Fit, care and readiness
Fit is a safety control, not a minor comfort issue. Boots should have enough room for toe movement and suitable ankle support, while clothing should allow unrestricted movement without loose fabric catching heat or snagging vegetation. Members should be fitted in the clothing they will use, with alternatives available for different body shapes and personal requirements.
After every deployment, assigned members should inspect their clothing and report damage, heat marking, contaminated fasteners or compromised seams. Laundering must follow manufacturer instructions, and repairs should use approved materials or replacement items rather than tape, thread or adhesive. Department stock should be stored dry, shaded and ready for issue, with an inventory process that identifies gaps before the next operational period.
Training crews to use it
A policy has little value until crew members can apply it under pressure. Training should include hands-on practice with layering, helmet straps, gloves, eye protection and boots, followed by short scenarios involving changing fire behaviour, restricted visibility and sudden escalation. A buddy-check system can help crews identify missing equipment before deployment.
Short evening sessions and regular refreshers can suit volunteer brigades with limited daytime attendance. New members should receive the same training as experienced crews, and refresher drills should cover heat stress, smoke exposure, communications and when to withdraw from a fire environment. PPE reduces exposure; it does not remove the need for sound situational awareness and incident command.
Building department ownership
Create a small working group that includes the brigade captain, safety officer, equipment coordinator, volunteers and a council or state agency representative. Members should be able to comment on fit, compatibility and affordability before the policy is adopted. Formal approval should align the standard with workplace safety duties, manufacturer instructions and the relevant state fire service.
Large grass fires can cross local government boundaries and place volunteer crews in the same area at once. For a useful cross-border model, Canadian volunteer coordination demonstrates how a regional network can maintain contacts, share resources and coordinate volunteers during broad incidents; state command and safety requirements in Australia still take precedence. Contact lists, equipment inventories and after-action notes should therefore be maintained through the association and shared with neighbouring brigades.
Put the standard into action
Create a one-page PPE policy, circulate it to every member, collect size requirements and begin filling supply gaps. Record which items are department-owned, who performs inspections and what triggers replacement. The policy should be discussed at the next routine meeting, tested during a practical drill and formally adopted before the next fire danger period.
Assign a named PPE coordinator and schedule the first fit-and-care session now. Every member should leave knowing which clothing to wear, how to inspect it, how to report a fit problem and when additional protection is required. A standard becomes useful when it is understood, worn correctly and ready for the next call.